The Model MC3 3-Note Chime Module is a module that can be installed in the dmc1 or dmc3-4 Music/Communication System Masters. To announce a visitor, the intercom system’s doorbell chime sounds when the bell button is pressed on a Door Station connected to the intercom. The module can be set to play one, two, or three notes for the intercom’s doorbell chime sound with a different chime for each door.

The Model MC8 8-Note Chime Module is a module that can be installed in the dmc1 or dmc3-4 Music/Communication System Masters. To announce a visitor, the intercom system’s doorbell chime sounds when the bell button is pressed on a Door Station connected to the intercom. The module can be set to play one, two, four, or eight notes for the intercom’s doorbell chime sound with a different chime for each door.

The Model TE5D Transformer Assembly is an ETL Listed, dual-output 16-volt AC, 37 VA direct wire transformer used for powering the Model dmc1 and dmc3-4 Music/Communications Systems. The transformer mounts in the bottom of Model dmc1H or dmc1HC Wall Housings. The transformer output wires are terminated with a connector that fits the dmc1 or dmc3-4 master.

The Model DMC1HR-5 Room Station Rough-in Ring (5-pack) is used to rough-in indoor room stations used with a DMC1 Music/Communication System installation. This rough-in ring is compatible with DMC1R, and all colors of DMC1RS Indoor Room Stations.

The Model DS3BXW Intercom Door Station Enclosure (White) is a surface-mount plastic enclosure. The enclosure is compatible with Model DS3B Door Station. The enclosure is white.

The Model DMC1HRWS Surface-mount Rough-in Enclosure is used to rough-in outdoor patio stations used with a DMC1 Music/Communication System installation. This plastic rough-in enclosure is compatible with the Model DMC1RW Patio Station.

The Model DMC1H Wall Housing Kit offers many of the components needed to rough-in a DMC1 or DMC3-4 intercom system. The kit includes: (1) – Metal wall housing for DMC1 or DMC3-4 (1) – FM Dipole Antenna (1) – Ferrite filter (4) – 1-1/2″ Snap-in bushings (1) – TE5D Transformer Assembly 75 feet of MS4DCXSC Shielded Speaker Cable 25 feet of antenna wire

The Model DMC1HC CD Combination Wall Housing Kit offers many of the components needed to rough-in a DMC1 or DMC3-4 intercom system with the optional music players. The kit includes: (1) – Metal wall housing for DMC1 or DMC3-4 with accessory music player (1) – FM Dipole Antenna (1) – Ferrite filter (1) – TE2D Transformer Assembly (1) – TE5D Transformer Assembly 75 feet of MS4DCXSC Shielded Speaker Cable 25 feet of antenna wire.

The Model MVC1 Monaural Volume Control mounts in a single-gang J-box and includes a standard white wall plate. The volume control is designed for 45-ohm intercom speakers.

The Model NR8P Ceiling Intercom Speaker is a 8-inch, 45-ohm, recessed ceiling speaker designed for use with intercom systems. The speaker frame is white with a white plastic grille. For rough-in, a Model NR8-5 Ceiling Intercom Speaker Mounting Ring is required with this model speaker.